Top 10 typical forklift mishaps ， forklift operation ought to focus on these matters ！.

Top 10 typical forklift mishaps ， forklift operation ought to focus on these matters ！.

Blog Article

Do not underestimate the forklift at the office. If the operation is bad, there will be serious crashes in minutes, and there are numerous crashes including forklifts.

Situation 1: The forklift cargo obstructed the vehicle driver's sight, and the person ahead can not be found, causing a rolling accident.
Case 2: In order to keep the equilibrium of the forklift when raising heavy items, the staff members utilized their body weight as the counterweight, which nearly triggered casualties.
Case 3: The width of the forklift freight goes beyond the allowable size of the path and hangs on the roadside rack, which almost creates an accident.
Instance 4: Forklift is speeding and surrender during a turn.
Instance 5: The forklift motorist did not see the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the employees unlawfully, the forklift driver does not wear the seat belt, the forklift lifter drops and the chauffeur is squashed when the forklift surrender.
Instance 7: The forklift motorist did not put on a seat belt and dropped from the vehicle when it surrendered and was squashed.
Forklift procedure should pay attention to these matters ：.

Start.
1. Prior to beginning, observe the surroundings, and after validating that there are no challenges that hinder the safety and security of driving, beep the horn first and afterwards start.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale have to be safe prior to starting.
3. When the forklift starts with a tons, the chauffeur needs to initially validate that the lots is stable and dependable.
4. The beginning should be sluggish and consistent.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the pole needs to be tilted backwards. .
2. Do not lift the fork expensive when driving. When entering and leaving the work website or while driving, be careful that there will be no challenges in the sky. When the tons is taking a trip, the fork has to not be increased too expensive, which will affect the stability of the forklift. .
3. After unloading, the fork ought to be decreased to the typical driving position before driving. .
4. When turning, if there are pedestrians or lorries nearby, the driving signal ought to be issued initially. High-speed sharp turns are restricted. High-speed doglegs will trigger the vehicle to lose side security and topple. .
5. When the forklift is downhill, it is purely forbidden to turn off the flame and slide, and it is prohibited to brake instantly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to obey the traffic rules in the factory and should keep a specific security range from the automobile ahead. .
7. When the forklift is running, the lots has to remain in the most affordable placement that does not prevent the driving, and the gantry needs to be properly slanted back. The tons will not be increased except when stacking or packing. .
8. The height of the load must not block the driver's view. In unique scenarios, when the thing impacts the forward vision, drive at a low speed when reversing.
9. It is forbidden to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low rate when getting in the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is prohibited for workers to stand on the fork to hold things and play a stabilizing function. .
12. If problems are located, they will certainly be repaired and reported in a timely fashion, and they will never run with health problems or conceal them.

filling and discharging.
1. When fork-loading products, the range in between the two forks need to be changed as needed to make the lots of the two forks balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is restricted to deal with a solitary fork or utilize Stand-on Electric Pallet Stacker a fork top or pull. In unique circumstances, security indication must be established to advise surrounding pedestrians. .
3. In the process of loading and dumping things, the forklift should be braked with the brake. .
4. The speed of the car need to be sluggish and consistent. Take care not to roll the wheels on the dunnage, so as not to extend the rolled things and harm individuals. .
5. When using a fork to fork the goods, the fork ought to be as deep as possible under the tons, and it must be noted that the fork pointer should not touch other goods or items. The tons should be maintained with marginal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be slanted forward somewhat when the load is decreased Stand-on Electric Pallet Stacker to allow for simple positioning of the lots and removal of the forks. .
6. It is restricted to fork goods at high speed and ram hard things with the fork head. .
7. When the forklift is functioning, it is prohibited for individuals to stand around the fork, so regarding avoid the collapse of the goods and hurt individuals. .
8. Overloading is restricted, and it is restricted to utilize forks to raise employees to engage in high-altitude operations to avoid high-altitude dropping mishaps. .
9. It is not permitted to make use of the brake inertia to slide, place, round or roll objects. .
10. It is not allowed to utilize forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you need to dump the goods or reduced the fork structure.
2. Draw the hand brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is removed. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not exceed 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance should be examined, and fuel, lubing oil and air conditioning water need to be included.
2. Check the safety performance of beginning, running and stopping.
3. Check whether the lights and horn signals are complete and effective.
4. Throughout the operation of the forklift, examine whether the stress and temperature are regular.
5. After the forklift is running, the exterior leakage should additionally be checked and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You should check before leaving the automobile;.
2. When you experience somebody before you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not surpass 5 km/h;.
4. When driving, the low point of the freight should be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be too sharp to prevent the tendency of " totally free switching";.
6. Running up and down the incline needs to be slow and consistent, and no turning on the slope is enabled.
7. Do not drive across the gradient. When the gradient is above 10%, the lorry should be driven backwards when declining;.
8. When the forklift personnel lug the goods and progress, if they come across large or heavy goods and go to the vehicle driver's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" should be followed in the operation.
1. Solitary fork procedure is not enabled.
2. It is not enabled to raise the goods for cross country driving.
3. It is not enabled to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not permitted to make use of inertia pressure to grab the goods.
6. It is not enabled to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not enabled to bring people to work on the pallet or fork, and it is purely prohibited to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the same size as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844